010-01-0080 in-house test report
Front seating capacity
CPSD-HL-01022-MTHD
No failure under 300 lb loading at edge (6 in.)
Seating - front stability
CPSD-HL-01020-MTHD
The chair is obstructed by 1 in bar in the front base, tipping force is measured in the 45° to the test platform. The tipping force shall not be less than 40% of the total chair weight.
Stability test dynamic - front stability
ANSI/BIFMA X5.1-11 Sec. 12
The chair is obstructed with a ½ In. obstruction to the chair casters or feet. A downward load of 600N (135 lbs) is centered 2.4 tippinginches from the seat front center edge. The seat shall withstand a 4.5 lbf. horizontally from the front seat edge without tipping
Leg strength Test- side application -functional load
ANSI/BIFMA X5.1-11 Sec. 18.4
It shall cause no loss of serviceability when a force of 334 N (75 lbf.) is applied to a front and rear leg individually for one(1) minute.
Leg strength test -front application -functional load
ANSI/BIFMA X5.1-11 Sec. 18.3
It shall cause no loss of serviceability when a force of 334 N (75 lbf.) is applied once to each front leg individually for one(1) minute