What are the main points of furniture customization?

- Jun 22, 2018-

The custom wardrobe process is simply divided into seven steps: initial understanding of the brand's products and consulting prices - review and determine the product plan - on-site measuring scale - to determine and provide product design solutions - the two sides signed the contract to pay the purchase price - the manufacturers shipped after delivery And install - after-sales service. From the early understanding to the later installation, the owner needs to spend a certain amount of time and effort to ensure the quality of the wardrobe.

Custom wardrobe notes

First, the bottom rail

When selecting a sliding door for a custom wardrobe, try to select the same material as the top and bottom rails, assuming that the top and bottom rails are load-bearing parts. To withstand repeated friction, custom closet so the top and bottom rails must be high-strength, wear-resistant, top and bottom rails using aluminum-magnesium-titanium-silicon alloys with higher strength, anti-deformation ability, can have a longer extended wardrobe life.

Second, the rubber strip

The main materials popular in the market are PVC rubber, silica gel and so on. The silicone strips are made of non-toxic, non-corrosive silicone material. It also maintains good toughness at very low temperatures and ensures flexible connections between the sheet and the profile.

Third, glue, edge banding, veneer

The edge band mainly seals the section of the sheet. Custom wardrobe to avoid damage to the board from the environment or the use of unfavorable factors (mainly moisture). Custom wardrobes also achieve decorative effects. Ordinary glue will have a pungent odor due to the presence of formaldehyde, and there is also the danger of cancer. Therefore, pay attention to whether or not the cabinet smells when purchasing.

Fourth, profiles

There are basically two types of material used for sliding doors: one is aluminum alloy and the other is plastic steel. Custom closet Due to its light weight and high strength, aluminum alloy is a high-grade material for sliding door substrates. Has gradually replaced the steel products. Custom closet and aluminum alloy itself is divided into ordinary aluminum-magnesium alloy and smaller aluminum-magnesium alloy for special aviation. Custom wardrobe because of the higher strength and lower weight of Al-Mg-Ti-Si alloy. Therefore, it is deeply favored by consumers, but the cost is several times that of ordinary aluminum-magnesium alloys. When looking at the profile, not only the substrate but also its surface treatment must be observed. Advanced surface treatments include anodic oxidation, electrocoating, carbon coating, etc. These processes have higher hardness and aesthetics than simple spraying and plating. Custom-made closet The electrophoretic film thickness of the US Kd adopts a film thickness of 20 μm, and its adhesion has reached the international highest level of 0, with unmatched scratch resistance.

V. Top and bottom wheels

Custom wardrobe top and bottom wheel is an important part of the sliding door, pay attention to the selection of high-quality bearing pulleys. The exterior of the custom-made closet bottom wheel is made of fiberglass material, featuring high strength, wear resistance and low noise. Use push-pull more than 100,000 times, custom wardrobe wheel body with three-degree polished plating, never rust.

Sixth, plate, substrate

The leeks commonly used in cabinet panels are blockboards, density boards, and moisture-proof chipboards. One of the most cost-effective custom wardrobes is the moisture-proof particle board, which has the advantages of light weight, high strength, and strong nail holding power, but the moisture-proof particleboard also has different qualities.