2.0 | Upholstery |
| 2.1 |
| General Construction Requirements |
| A. |
| Must have hardwood frame and wood type must be specified. |
| B. |
| Specify 8-way hand tie, webbing, or sinuous spring (if sinuous spring, metal gauge must be specified). |
| C. |
| Specify cushion construction. Ie. Solid foam (note density), Pocket coil |
| D. |
| Number of coils per seat must be specified. |
| E. |
| Foam density must be specified. |
| F. |
| Fill type must be specified. |
| G. |
| No mending/blocking of broken frames is permitted. |
| H. |
| All fabrics should have a heavy duty backing. |
| I. |
| Back and sides should be plywood (min 4mm) with additional padding. |
| J. |
| Individual nail heads only, no strips. Nail heads must be spaced evenly and proportionately with unit design. |