1.9		Bar Height & Counter Height   Stools (dining chairs & barstools)
A.		Any stool with a   foot-rest stretcher must have a metal cap.
B.		Metal cap must   be a ‘U’ shape configuration and cover the top, front & back of the   stretcher.  The cap must minimally   cover 5mm of the front & back of the stretcher. A full ‘U’ cap covering   all of the front & back of the stretcher is acceptable. Top plate is   acceptable if stretcher is circular.
C.		All chairs,   regardless of height, are required to be fully assembled.  The only exceptions are bucket-over-base   packaged swivel barstools, gas-lift barstools & office chairs, and some   dining height chairs (written approval by buyer required).